Manufactur standard Small Dc Brushless Motor - stepper motor driver-DM2722A – Longs Motor Detail:
DM2722A is a new-generation digital 2-phase stepper motor driver based on DSP control. The driver combines advanced DSP control technique and unique control circuit. The driver voltage is AC110-230V and driver current is below 7.0A. The driver can be used for types of 2-phase stepper motor with external diameter 86-130mm. The driver adopts circuit similar to servo control, so the motor can run smoothly with little vibration and noise. And the maximum positioning accuracy could reach 40,000 steps/rev. The product is widely used in big and medium-sized CNC equipment with higher resolution, such as engraving machine, medium-sized CNC machine tool, computer-controlled embroidery machine, packing machine, etc.
- High performance, low price
- The driver features 16-grade micro-stepping with equal angular degree and constant torque; the highest resolution may reach 40,000 steps/rev.
- The highest response frequency can reach 500Kpps
- When the step-by-step impulse has halted for over 100ms, the coil current will automatically reduce to half of the set value, to effectively reduce motor warming.
- Photoelectric isolation signal input/output
- Driver current from 1.0A / phase to 7.0A / phase, adjustable with 16 grades
- Single power input, voltage range: AC 110V to 230V
- Phase memory function (when the input has stopped unexpectedly or powered off, the driver will automatically memorize motor phase at that time.)
- I/O signal, the driver uses photoelectric isolation technique and signal level is 5V ~ 24V, compatible
- Function of pulse smooth technique makes the motor run stably at low speed. The level of smooth can be adjusted.
- It features motor inductance adjustment function, giving full play to the adaptive motor.
Product detail pictures:
Related Product Guide:
Basic Motion Control – An Introduction to Stepper Motors
Finding Inexpensive Stepper Motors
Attaining consumer satisfaction is our firm's purpose for good. We'll make wonderful efforts to produce new and top-quality merchandise, meet up with your special necessities and supply you with pre-sale, on-sale and after-sale products and services for Manufactur standard Small Dc Brushless Motor - stepper motor driver-DM2722A – Longs Motor, The product will supply to all over the world, such as: Detroit , Philippines , Sevilla , Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Kim from Kyrgyzstan - 2018.09.21 11:01
Goods just received, we are very satisfied, a very good supplier, hope to make persistent efforts to do better.
By Lee from Mexico - 2017.10.25 15:53