Atik sa a gen ladan:
1. 4 pcs Stepper motè chofè DM542A, PEAK 4.2A, 128 micsteps
2. 1 pc tablo levasyon
enfòmasyon detaye
1. Stepper motè chofè-DM542A
Entwodiksyon:
DM542A is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is smiliar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DM542A run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, and computer embroider machine, packing machines and so on.
2. Breakout board:
Deskripsyon:
• Bati nan Connector DB25 gason.
• DB25 Sòti PIN: P1, P2, P3, P4, P5, P6, P7, P8, P9, P14, P16, P17.
• DB25 Antre PIN: P10, P11, P12, p13, P15.
• DB25 GND PIN: P18-P25.
• Pouvwa materyèl: + 5V DC.
• Bati nan C-klas Optical-koupleur.
• High quality with Surface-mount Tech.
Karakteristik:
Segondè pèfòmans, pri ki ba
Mwayèn kontwòl kounye a, 2-faz sinuzoido pwodiksyon aktyèl kondwi
vòltaj Pwovizyon pou soti nan 24VDC 80VDC
Opto-izole siyal I / O
Ovèrvoltaj, anba vòltaj, overcorrect, faz kout pwoteksyon kous
14 chanèl divizyon ak otomatik rediksyon san fè anyen konsa-aktyèl
8 chanèl faz pwodiksyon anviwònman aktyèl
Offline lòd D 'tèminal
Se koupl Machin ki gen rapò ak vitès, men se pa ki gen rapò ak etap / revolisyon gwo vitès kòmanse
Segondè hording koupl anba gwo vitès