Hot Selling for Nema 11 Gear Motor 3d Printer - HYBRID STEPPER MOTOR-20BYGH(8HS) – Longs Motor Detail:
SERIES HYBRID STEPPING MOTOR
General Specifications
Model:8HS(20BYGH 1.8°)
Step Accuracy———————————±5%
Temperature Rise—————————-80℃ Max.
Ambient Temperature Range———- -20℃~+50℃
Insulation Resistance———–100MΩ Min.50V DC
Dielectric Strength—————–500V AC 1minute
Electrical Specifications:
Series Model
|
Step Angle (°) |
Motor Length (mm) |
Rated Current (A) |
Phase Resistance (Ω) |
Phase Inductance (mH) |
Holding Torque (N.cm Min) |
Detent Torque (N.cm Max) |
Rotor Inertia (g.cm²) |
Lead Wire (No.) |
Motor Weight (g) |
8HS2402 |
1.8 |
28 |
0.2 |
23 |
8.2 |
1.4 |
0.2 |
2.5 |
4 |
50 |
8HS2406 |
1.8 |
28 |
0.6 |
3.2 |
0.9 |
1.4 |
0.2 |
2.5 |
4 |
50 |
8HS3402 |
1.8 |
34 |
0.2 |
25 |
8.4 |
1.8 |
0.3 |
3.2 |
4 |
70 |
8HS3406 |
1.8 |
34 |
0.6 |
4.5 |
1.2 |
1.8 |
0.3 |
3.2 |
4 |
70 |
8HS4402 |
1.8 |
40 |
0.2 |
32 |
8.8 |
2.6 |
0.5 |
4.5 |
4 |
82 |
8HS4406 |
1.8 |
40 |
0.6 |
5.8 |
1.6 |
2.6 |
0.5 |
4.5 |
4 |
82 |
*We can manufacture products according to customer’s requirement.
Dimensions: unit=mm
Product detail pictures:
Related Product Guide:
Finding Inexpensive Stepper Motors
Basic Motion Control – An Introduction to Stepper Motors
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Hot Selling for Nema 11 Gear Motor 3d Printer - HYBRID STEPPER MOTOR-20BYGH(8HS) – Longs Motor, The product will supply to all over the world, such as: Switzerland , Guatemala , Anguilla , We are proud to supply our products to every auto fan all around the world with our flexible, fast efficient services and strictest quality control standard which has always approved and praised by customers.
By Elvira from Slovakia - 2018.06.12 16:22
The customer service staff's answer is very meticulous, the most important is that the product quality is very good, and packaged carefully, shipped quickly!
By Tony from Lithuania - 2017.09.16 13:44